Bacon Pecan Brittle Recipe (2024)

FAQs

Why put baking soda in peanut brittle? ›

Baking soda is also very important at this stage since it reacts to the heat, creating carbon dioxide that aerates the caramel, enabling it to snap when someone bites into it rather than requiring them to gnaw at it until it breaks or pulls apart.

This is a temperature issue. Make sure the candy reaches exactly 300ºF / 149ºC, which is hard crack stage, before pouring onto baking sheet. See “Equipment Used to Make Peanut Brittle” for my recommended thermometer. If you're peanut brittle is still chewy after it cools, you may be able to save it!

Just one degree too cool will make your brittle not so brittle, which is true for any kind of nut brittle you make like almond or pumpkin seed brittle. If you are in a pinch and don't have a thermometer specifically for candy, you can use a digital thermometer, as long as it will measure temps as high as 300 degrees.

History. The combination is believed to have developed in the South during the 1920s, as a snack for blue-collar workers that did not require them to wash their hands. It quickly became popular as a summer snack, especially in rural areas. The snack became an internet trend in 2018.

If you overcook the brittle, it could be bitter or burnt. If you undercook it, the brittle won't properly set and the end result will be sticky.

To keep the pecan meat from shattering, the nuts are moistened or “conditioned” before cracking. There are two methods used to accomplish this. The cold water method soaks the pecans in chlorinated water for as long as eight hours.

Nuts with higher fat content, like walnuts and pecans can also go rancid after a few months if stored at too warm a temperature. If you notice that your nuts have taken on a noticeably bitter, sour flavor, they may have entered this unfortunate phase.

After 45 minutes, remove them from the oven and let them rest. You can remove the pecans to a baking sheet to cool faster if you like. Stir them every 10 minutes or so to avoid them clumping together, or you can just break them apart with a spatula or your hands later. Store in an airtight container for up to a week.

To store: Store peanut brittle (once it's completely cooled) in an airtight container at room temperature. Do not refrigerate as the moisture from the fridge will cause the brittle to soften. Store for 6-8 weeks. To freeze: Peanut brittle can be frozen and stored up to 3 months.

What causes peanut brittle to be too hard? ›

Why is it too hard? Using baking soda usually prevents peanut brittle from being too, well, brittle. However, if you cook the candy past the set temperature or overwork the candy once you spread it out onto the cookie sheet, that can cause it to become very hard and difficult to bite through.

When candy cools slowly on a stone slab, more crystals have a chance to form. With a higher number of micro-crystals, the sugar has more sites on which to crystallize, and so crystallization ultimately happens faster.

Baking soda releases bubbles into our candy (you can see this on a more extreme level in my honeycomb recipe, which uses 5x the amount of baking soda!). This makes the brittle more delicate, crisp, and less chewy, which ultimately makes it more snappy and less likely to obnoxiously stick to your teeth.

This brittle has a great shelf life, if kept in airtight zip locks or containers; it will keep for 2 months.

How Long Does Peanut Brittle Last? Properly stored (in an airtight container at room temperature), peanut brittle will last one to two months.

Why do you put baking soda in peanut brittle? In short: the alkaline of the baking soda reacts with the acids of the sugar to creates lots of CO2 bubbles. This interrupts the crystalline structure, making it more delicate and easily cracked…and thus more “brittle”.

The secret is in the baking soda. As the sugar is cooking and begins turning amber in color it accumulates small amounts of acid, and that acid reacts chemically with the alkaline baking soda releasing about a zillion minuscule bubbles of CO₂ that get trapped, making the sugar porous and, well… brittle.

Examples of interfering agents include corn syrup and cream of tartar. A key step in making brittle is heating the syrup to the proper temperature.

Why is it too hard? Using baking soda usually prevents peanut brittle from being too, well, brittle. However, if you cook the candy past the set temperature or overwork the candy once you spread it out onto the cookie sheet, that can cause it to become very hard and difficult to bite through.